General Information
Type of service provider
Testing laboratory
Physical postal address
#2, Disevi Str,
Tbilisi
Georgia
Phone number
+995 32 45 12 57
E-mail
info [at] tranfiber-service.com
Legal Status
Private
Has the laboratory been accredited in any scopes?
Yes
Scopes of Accreditation
ISO/IEC 17025:2010
1. Electronic Devices: Power Transformers, Vehicle Transformers, Reactors, Power Transformers, Voltage Transformers, High Voltage Inputs, Oven, Vacuum, Elegant, Breakers; 2. Oil products: transformer oil, turbine oil, compressor oil, motor oils, diesel fuel.
1. Electronic Devices: Power Transformers, Vehicle Transformers, Reactors, Power Transformers, Voltage Transformers, High Voltage Inputs, Oven, Vacuum, Elegant, Breakers; 2. Oil products: transformer oil, turbine oil, compressor oil, motor oils, diesel fuel.
Accreditation body
GAC-TL-0234, The Georgian National accreditation body – Accreditation Center (GAC)
Does the laboratory have other sites?
No
Personnel
Chief Executive Officer (CEO) / Head of Organization
CEO Name
Ivane Sachaleli
CEO Phone
CEO E-mail
sachaleli [at] yahoo.com
Total laboratory personnel
Total laboratory personnel
7
Male laboratory personnel
2
Female laboratory personnel
5
Technical personnel
Technical personnel total
4
Male technical personnel
2
Female technical personnel
2
Technical Information
Testing
Laboratory services offered
Chemical
Electrical
Scope of services offered
Test object or product tested or matrices
Transformer oil
Test parameter/ properties measured
1. Kinematic viscosity
2. Methods for determination of flash point in Pensky-Martens closed cup
3. Determine the class of purity of mechanical impurities
4. Determination of flash and fire points — Cleveland open cup method
5. Mechanical impurities content
6. Transparency
7. Density
8. Surface tension
9. Color
10. Structure-group composition
11. Turnover rate (refraction coefficient)
12. Air content
13. Angle of dielectric loss
14. Breakdown voltage
15. Angular volume impedance
16. Dielectric penetration
17. The number of saponification
18. Moisture content
19. Water content
20. Soluble and insoluble precipitate
21. Ionol content
22. Acidic number
23. Water-soluble acids and alkalis
24. Sodium sample, optical density
25. Cortical aggressiveness of oil
26. Stability to oxidation
27. Turbulence
28. DGI – Dissolved gas analyses in oil CO, CO2, H2, CH4, C2H2, C2H4, C2H6
2. Methods for determination of flash point in Pensky-Martens closed cup
3. Determine the class of purity of mechanical impurities
4. Determination of flash and fire points — Cleveland open cup method
5. Mechanical impurities content
6. Transparency
7. Density
8. Surface tension
9. Color
10. Structure-group composition
11. Turnover rate (refraction coefficient)
12. Air content
13. Angle of dielectric loss
14. Breakdown voltage
15. Angular volume impedance
16. Dielectric penetration
17. The number of saponification
18. Moisture content
19. Water content
20. Soluble and insoluble precipitate
21. Ionol content
22. Acidic number
23. Water-soluble acids and alkalis
24. Sodium sample, optical density
25. Cortical aggressiveness of oil
26. Stability to oxidation
27. Turbulence
28. DGI – Dissolved gas analyses in oil CO, CO2, H2, CH4, C2H2, C2H4, C2H6
Type of test/ instrumentation used
Baur DTA 100 C, PH meter S220 METTLER TOLEDO Switzerland, Karl Fischer Titrator
Aqvamax KF England, Chromatek Crystal 5000.2
Chromatek Russia
Aqvamax KF England, Chromatek Crystal 5000.2
Chromatek Russia
Methods
ISO 2719
ISO 2592
IEC 60475-2011
IEC 60567-2011
ISO 2592
IEC 60475-2011
IEC 60567-2011
Accreditation status
Yes
Test object or product tested or matrices
Turbine oil
Test parameter/ properties measured
1. Kinematic viscosity
2. Temperature of the explosion in the open cup
3. Determine the class of purity of mechanical impurities
4. Mechanical impurities content
5. Transparency
6. Density
7. Water content
8. Soluble and insoluble precipitate
9. Acid number
10. Water-soluble acids and alkalis
11. Define the verse
12. Stability to oxidation
13. Implant Index
2. Temperature of the explosion in the open cup
3. Determine the class of purity of mechanical impurities
4. Mechanical impurities content
5. Transparency
6. Density
7. Water content
8. Soluble and insoluble precipitate
9. Acid number
10. Water-soluble acids and alkalis
11. Define the verse
12. Stability to oxidation
13. Implant Index
Methods
IEC 60475
Accreditation status
Yes
Test object or product tested or matrices
Power transformers / Voltage Transformer / Current Transformer
Test parameter/ properties measured
Testing
Type of test/ instrumentation used
Omicron. HT 7050, CT Analyzer, VOTANO-100, CPC-100, TD1
Methods
IEC 60076
IEC 60044
IEC 61869
IEC 60044
IEC 61869
Accreditation status
Yes
Does the laboratory conduct sampling, upon request of the client, of products to be tested?
Yes
Proficiency Testing
Does the lab participate in proficiency testing for accredited scopes
Yes
Does the lab participate in proficiency testing for non-accredited scopes
No
PT Scheme details
PT Scheme on DGA in Transformer Oil iis19L14, Institute for Interlaboratory Studies, Netherlands
Does the laboratory sub-contract testing work to other laboratories?
No
Quality Control / Quality Management
Does the lab operate an internal quality control (QC) system to ensure quality of test results?
Yes
Does the lab operate a management system (or Quality Management System) for assuring the quality of results?
Yes
Is the system documented in a Quality Manual?
Yes