General Information
Type of service provider
Calibration laboratory
Physical postal address
Av. de Moçambique, Parcela 7168/D1/7, Bairro do Zimpeto, C.P. 2983
Maputo
Mozambique
Phone number
+258 21 344600 /+258 824756985
E-mail
Innoq.metrologia [at] gov.mz
innoq.metrologia [at] yahoo.com
devis.magaia04 [at] gmail.com
Website
Legal Status
Public
Has the laboratory been accredited in any scopes?
Yes
Scopes of Accreditation
Calibration of measuring instruments and Testing of temperature installations on ISO/IEC 17025
Accreditation body
Instituto Português de Acreditação – IPAC
Does the laboratory have other sites?
No
Personnel
Chief Executive Officer (CEO) / Head of Organization
CEO Name
CEO - Dr Alfredo Filipe Sitoe
CEO Phone
CEO E-mail
asitoe1961 [at] gmail.com
Total laboratory personnel
Total laboratory personnel
19
Male laboratory personnel
16
Female laboratory personnel
3
Technical Information
Fields of Metrology
Dimensional
Mass
Pressure
Temperature
Volume and density
Other calibration laboratory services
Electrical
Scope of calibration services offered
Calibration object
Scale Standards
Quantity/ Property
Mass
Procedure reference
Comparison measurements against reference standards
Range/ Limit
From 1 mg to 1 500 kg
CMC
From 1 mg to 120 000 kg
Accreditation status
Yes
Calibration object
Mass standards
Quantity/ Property
Mass
Procedure reference
Comparison measurements against reference standards
Range/ Limit
From 1 mg to 20 kg
CMC
From 1 mg to 3000 kg
Accreditation status
Yes
Calibration object
Digital and Analogic thermometers
Quantity/ Property
Temperature
Procedure reference
Comparison measurements against reference standards
Range/ Limit
From -80 ºC to 650 ºC
CMC
From -80 ºC to 1000 ºC
Accreditation status
Yes
Calibration object
Temperature Installations
Quantity/ Property
Temperature
Procedure reference
Comparison testing measurements against reference standards
Range/ Limit
From -80 ºC to 300 ºC
CMC
From -80 ºC to 1000 ºC
Accreditation status
Yes
Calibration object
Micropipettes
Quantity/ Property
Volume
Procedure reference
Gravimetric measurement against reference mass
Range/ Limit
Form 1 µL to 1000 µL
CMC
Form 1 µL to 1000 µL
Accreditation status
Yes
Calibration object
Digital and analogic manometers
Quantity/ Property
Pressure
Procedure reference
Comparison testing measurements against reference standards
Range/ Limit
Up to 135 bars
CMC
Up to 1200 bars
Accreditation status
Yes
Calibration object
Digital multimeters
Quantity/ Property
Electrical
Procedure reference
Comparison testing measurements against reference standards
Range/ Limit
DC, AC (330 mA to 20.5 A);
voltage (330 mV to 1020 V);
Resistance up to 1.1 G ohm
voltage (330 mV to 1020 V);
Resistance up to 1.1 G ohm
CMC
DC, AC (330 mA to 1025 A);
voltage (330 mV to 1020 V);
Resistance up to 1.1 G ohm
voltage (330 mV to 1020 V);
Resistance up to 1.1 G ohm
Accreditation status
Yes
Calibration object
Calipers, tapes and micrometers
Quantity/ Property
Dimensional
Procedure reference
Comparison testing measurements against reference standards
Range/ Limit
Tapes: From 300 mm to 50 m;
Calipers: From 1.001 mm to 100 mm;
Micrometers: From 1.001 mm to 100 mm;
Calipers: From 1.001 mm to 100 mm;
Micrometers: From 1.001 mm to 100 mm;
CMC
Calipers: From 1.001 mm to 100 mm;
Micrometers: From 1.001 mm to 100 mm
Micrometers: From 1.001 mm to 100 mm
Accreditation status
No
Calibration object
Hygrometers
Quantity/ Property
Density
Procedure reference
Comparison testing measurements against reference standards
Range/ Limit
From 750 kg/m³ to 1100 kg/m³
CMC
From 750 kg/m³ to 1100 kg/m³
Accreditation status
No
Uncertainty of measurements reports
Yes
How does the laboratory ensure international traceability of its measurements standards?
Through calibration certificates issues by an accredited national laboratory
no
Through calibration certificates issues by an accredited overseas laboratory
Yes
Does the lab participate in any inter- laboratory comparison?
Yes
Does the laboratory sub-contract calibration work to other laboratories?
No
Quality Control / Quality Management
Does the lab operate an internal quality control (QC) system to ensure quality of measurement?
Yes
Does the lab operate a management system (or Quality Management System) for assuring the quality of calibrations?
Yes
Is the system documented in a Quality Manual?
Yes