Updated: Sep-30-2020

General Information

Type of service provider
Calibration laboratory
Physical postal address

Bogota, ,
Colombia

Phone number
+57 866 44 44 / 316 832 8970
E-mail
juan.patino [at] stork.com
Has the laboratory been accredited in any scopes?
Yes
Scopes of Accreditation
Calibration in electric magnitudes, torque, pressure for fixed seat and mobile laboratory.
Accreditation body
Colombian National Accreditation Agency ONAC, certificate code 15-LAC-051
Does the laboratory have other sites?
No

Personnel

Chief Executive Officer (CEO) / Head of Organization

CEO Name
Reinado Rodriguez
CEO Phone
CEO E-mail
Reinaldo.rodriguez [at] stork.com

Total laboratory personnel

Total laboratory personnel
10
Male laboratory personnel
8
Female laboratory personnel
2

Technical personnel

Technical personnel total
5
Male technical personnel
5
Female technical personnel
0

Technical Information

Fields of Metrology

DC and low frequency electrical
Pressure
Other
Other calibration laboratory services
Torsional torque
Scope of calibration services offered
Calibration object
Digital instruments with DC voltage measurement function up to 4 ½ digits
Quantity/ Property
DC electrical voltage
Procedure reference
Procedure EL-001 for the calibration of digital multimeters, Digital Edition 1, CEM: Spanish Metrology Center
Range/ Limit
1 mV to 329.9 mV; 0.33 V to 3.29 V; 3.3 V to 32.9 V; 33 V to 329.9 V; 330 V to 1000 V
CMC
0,046 μV/mV + 4,5 μV; 23 μV/V + 80 μV; 47 μV/V + 0,13 mV; 45 μV/V + 1,8 mV; 82 μV/V + 21 mV
Accreditation status
Yes
Calibration object
Digital instruments with DC voltage measurement function up to 4 ½ digits
Quantity/ Property
AC Electrical voltage
Procedure reference
Procedure EL-001 for the calibration of digital multimeters, Digital Edition 1, CEM: Spanish Metrology Center
Range/ Limit
" 10 mV to 32.9 mV, 60 Hz to 1000 Hz
" 33 mV to 329.9 mV, 60 Hz to 1000 Hz
" 0.33 V to 3.29 V, 60 Hz to 1000 Hz
" 0.33 V to 3.29 V, 1 kHz to 20 kHz
"3.3 V to 32.9 V, 60 Hz to 1000 Hz
"33 V to 329.9 V, 60 Hz to 1000 Hz
"330 V to 1000 V, 60 Hz a 1000 Hz"
CMC
0,60 μV/mV + 0,10 mV; 0,44 μV/mV + 0,11 mV; 0,24 mV/V + 1,7 mV; 0,59 mV/V + 1,6 mV; 0,45 mV/V + 3,0 mV; 1,7 mV/V + 23 mV; 1,7 mV/V + 0,14 V
Accreditation status
Yes
Calibration object
Digital instruments with DC voltage measurement function up to 4 ½ digits
Quantity/ Property
DC electric current
Procedure reference
Procedure EL-001 for the calibration of digital multimeters, Digital Edition 1, CEM: Spanish Metrology Center
Range/ Limit
2 mA to 32.9 mA, 33 mA to 329.9 mA, 0.33 A to 10 A
CMC
0,10 μA/mA + 0,23 μA
0,042 μA/mA + 24 μA
1,3 mA/A + 2,6 μA
Accreditation status
Yes
Calibration object
Digital current clamps with DC measurement function, direct or indirect reading up to 4½
Quantity/ Property
DC electrical current
Procedure reference
Guide Line for the la Taratura Di Pinze AMPEROMETRICHE SIT / Tec-014/06. Rev0
Range/ Limit
10 A to 300 A; > 3001 A to 1000 A
CMC
8,5 mA/A + 0,41 A
5,5 mA/A + 1,3 A
Accreditation status
Yes
Calibration object
Digital instruments with DC voltage measurement function up to 4 ½ digits
Quantity/ Property
AC electric current
Procedure reference
Procedure EL-001 for the calibration of digital multimeters, Digital Edition 1, CEM: Spanish Metrology Center
Range/ Limit
"5 mA a 32,9 mA, 60 Hz a 1000 Hz"
"33 mA a 329,9 mA, 60 Hz a 1000 Hz"
"0,33 A a 10 A, 60 Hz a 1000 Hz"
CMC
0,86 μA/mA + 6,4 μA
0,34 μA/mA + 69 μA
2,7 mA/A + 0,18 mA
Accreditation status
Yes
Calibration object
Digital current clamps with DC measurement function, direct or indirect reading up to 4½
Quantity/ Property
AC Electrical current
Procedure reference
Line Guide for the Amerpmetriche Pinze treatment SIT/Tec-014/06. Rev0
Range/ Limit
"10 A a 300 A, 60 Hz"
" > 300 A a 1000 A, 60 Hz"
CMC
12 mA/A + 0,22 A
7,8 mA/A + 1,4 A
Accreditation status
Yes
Calibration object
Digital instruments with DC voltage measurement function up to 4 ½ digits
Quantity/ Property
Resistance
Procedure reference
Procedure EL-001 for the calibration of digital multimeters, Digital Edition 1, CEM: Spanish Metrology Center
Range/ Limit
10 Ω a 329,9 Ω
0,33 kΩ a 3,29 kΩ
3,3 kΩ a 32,9 kΩ
33 kΩ a 329,9 kΩ
0,33 MΩ a 3,29 MΩ
3,3 MΩ a 32,9 MΩ
33 MΩ a 100 MΩ
CMC
85 μΩ/Ω + 12 mΩ
0,12 Ω/kΩ + 12 mΩ
0,051 Ω/kΩ + 2,4 Ω
0,12 Ω/kΩ + 0,7 Ω
0,14 kΩ/MΩ + 0,042 kΩ
0,86 kΩ/MΩ + 0,56 kΩ
4,9 kΩ/MΩ + 4 kΩ
Accreditation status
Yes
Calibration object
Digital instruments with high resistance measurement function, Megohmmeters, insulation meters.
Quantity/ Property
Resistance
Procedure reference
Procedure EL-004 for the calibration of Megohmmeters, Digital Edition 1, CEM: Spanish Center of Metrology
Range/ Limit
10 MΩ
100 MΩ
1000 MΩ
10 GΩ
CMC
0,013 MΩ
0,13 MΩ
1,4 MΩ
15 MΩ
Accreditation status
Yes
Calibration object
Temperature indicators for thermocouple type sensors K, J
Quantity/ Property
Electrical temperature simulation
Procedure reference
Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical Simulation and Measurement. EURAMET cg-11, Version 2.0 (03/2011)
Range/ Limit
-180 °C a 0 °C
> 0 °C a 800 °C
> 800 °C a 1100 °C
CMC
0,87 °C
0,57 °C
0,63 °C
Accreditation status
Yes
Calibration object
Temperature simulators for thermocouple type sensors K, J
Quantity/ Property
Electrical temperature simulation
Procedure reference
Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical Simulation and Measurement. EURAMET cg-11, Version 2.0 (03/2011)
Range/ Limit
-180 °C to 0 °C
> 0 °C to 800 °C
> 800 °C to 1300 °C
CMC
0,89 °C
0,58 °C
0,63 °C
Accreditation status
Yes
Calibration object
Temperature indicators for Pt100 385 RTD sensors with 2, 3 or 4-wire connection
Quantity/ Property
Electrical temperature simulation
Procedure reference
Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical Simulation and Measurement. EURAMET cg-11, Version 2.0 (03/2011)
Range/ Limit
-180 °C to 100 °C
100.1 °C to 700 °C
CMC
0,080 °C
0,20 °C
Accreditation status
Yes
Calibration object
Temperature simulators for Pt100 385 RTD sensors with 2, 3 or 4 wire connection
Quantity/ Property
Electrical temperature simulation
Procedure reference
Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical Simulation and Measurement. EURAMET cg-11, Version 2.0 (03/2011)
Range/ Limit
-180 °C to 100 °C
100.1 °C to 600 °C
CMC
0,093 °C
0,18 °C
Accreditation status
Yes
Calibration object
Class (CL) digital pressure indicators worse than 0.05 at full scale
Quantity/ Property
Pressure
Procedure reference
ME-010 procedure for the calibration of pressure calibrators. Digital Edition 1, CEM: Spanish Metrology Center.
Range/ Limit
"0 kPa a 3,45 MPa, (0 psi a 500 psi)"
"3.458 MPa a 6.89 MPa, (> 500 psi a 1000 psi) "
"> 6,895 MPa a 20,68 MPa, (> 1000 psi a 3000 psi)"
"20,68 MPa a 34,47 MPa, (> 3000 psi a 5000 psi)"
"34,47 MPa a 68,95 MPa, (> 5 000 psi a 10 000 psi)"
CMC
"0,17 kPa, (0,025 psi)"
"0,68 kPa, (0,10 psi)"
"2,0 kPa, (0,29 psi)"
"2,2 kPa, (0,32 psi)"
"6,6 kPa, (1,0 psi)"
Accreditation status
Yes
Calibration object
Type I, class A, B and C, clockwise
Type II torque wrenches, class A,B,C and G, clockwise
Quantity/ Property
Torsional torque
Procedure reference
NTC 5330:2004, Assembly Tools for Screws and Nuts Manual Torque Meters (Manual Torque Tool). Requirements and test methods for determining design and quality conformity and for recalibration procedure. Numerals (1; 2; 3; 4; 5.1.5; 6; Annex A and Annex B).
Range/ Limit
"67.8 N.m to 339 N.m (50 lbf.ft to 250 lbf.ft)"
" > 339 N.m to 1355.8 N.m
(> 250 lbf.ft to 1000 lbf.ft)"
CMC
"0,0022 · Z + 0,76 N.m ((0,0022 · X) + 0,56 lbf.ft)"
"(0,0014 · Z) + 1,4 ((0,0014 · X) + 1)"
Accreditation status
Yes
Uncertainty of measurements reports
Yes
Statement identifying how the measurements are metrologically traceable
Yes

How does the laboratory ensure international traceability of its measurements standards?

Through calibration certificates issues by an accredited national laboratory
Yes
Through calibration certificates issues by an accredited overseas laboratory
Yes
Does the lab participate in any inter- laboratory comparison?
Yes
Does the laboratory sub-contract calibration work to other laboratories?
No

Quality Control / Quality Management

Does the lab operate an internal quality control (QC) system to ensure quality of measurement?
Yes
Does the lab operate a management system (or Quality Management System) for assuring the quality of calibrations?
Yes
Is the system documented in a Quality Manual?
Yes