General Information
Type of service provider
Calibration laboratory
Physical postal address
DLCO HANGAR, WILSON AIRPORT
Nairobi
Kenya
Phone number
+254 (0) 20 2562555
E-mail
calibration [at] proav-support.com
sales [at] proav-support.com
Website
Legal Status
Private
Has the laboratory been accredited in any scopes?
Yes
Scopes of Accreditation
1. Pressure 2. Torque 3. AC/DC
Accreditation body
KENYA ACCREDITATION SERVICE (KENAS) REF NUMBER: KENAS/CL/33
Does the laboratory have other sites?
No
Personnel
Chief Executive Officer (CEO) / Head of Organization
CEO Name
RANJEET SEHMI DAVID THUO
CEO Phone
CEO E-mail
raju [at] aero-atas.com
Total laboratory personnel
Total laboratory personnel
6
Male laboratory personnel
4
Female laboratory personnel
2
Technical personnel
Technical personnel total
3
Male technical personnel
2
Female technical personnel
1
Technical Information
Fields of Metrology
DC and low frequency electrical
Force
Pressure
Scope of calibration services offered
Calibration object
Pressure Gauges
Quantity/ Property
Pressure
Procedure reference
Ref. Method: DKD‐R6‐1:2006 and KS 09‐ 731:1985.
Internal Method: Direct Comparison‐ PASLCC/CAL/S TDM‐PC
Internal Method: Direct Comparison‐ PASLCC/CAL/S TDM‐PC
Range/ Limit
From 0 psi to 3000psi
CMC
(0 to 3000 psi) ± 15,0 %
Accreditation status
Yes
Calibration object
Multimeters DC/AC Voltmeters and Clamp meters.
Multimeters DC/AC ammeters and Clamp meters.
Multimeters DC/AC ammeters and Clamp meters.
Quantity/ Property
AC/DC
Procedure reference
Ref. Method: Euramet cg‐ 15:2015.
Internal Method: Direct Comparison‐ PASLCC/CAL/S TDM‐EQC.
Internal Method: Direct Comparison‐ PASLCC/CAL/S TDM‐EQC.
Range/ Limit
From 0 to 1000V (DCV)
From 0 to 1000V (ACV,60Hz)
From 0,1A to 10A (DC)
Above 10A to 20A (DC)
From 0,1A to 10A (AC,60Hz)
Above 10A to 20A (AC,60Hz)
From 0 to 1000V (ACV,60Hz)
From 0,1A to 10A (DC)
Above 10A to 20A (DC)
From 0,1A to 10A (AC,60Hz)
Above 10A to 20A (AC,60Hz)
CMC
(0 to 1000V) ± 0,6∙10^-3
(0 to 1000V) ± 4,0∙10^‐3
(0,1A to 10A) ± 8,0∙10^‐3
(>10A to 20A) ± 24,0∙10^‐3
(0,1A to 10A) ± 12,0∙10^‐3
(>10A to 20A) ± 0,1∙100^0
(0 to 1000V) ± 4,0∙10^‐3
(0,1A to 10A) ± 8,0∙10^‐3
(>10A to 20A) ± 24,0∙10^‐3
(0,1A to 10A) ± 12,0∙10^‐3
(>10A to 20A) ± 0,1∙100^0
Accreditation status
Yes
Calibration object
Torque Wrenches
Quantity/ Property
Torque
Procedure reference
Ref. Method: ISO 6789 ‐ 1&2 :2017
Internal Method: Direct Comparison‐PASLCC/CAL/S TDM‐TC
Internal Method: Direct Comparison‐PASLCC/CAL/S TDM‐TC
Range/ Limit
From 0 N.m to 480 N.m
CMC
(0 to 480N.m psi) ± 2,69 %
Accreditation status
Yes
Uncertainty of measurements reports
Yes
How does the laboratory ensure international traceability of its measurements standards?
Through calibration certificates issues by an accredited national laboratory
Yes
Through calibration certificates issues by an accredited overseas laboratory
Yes
Does the lab participate in any inter- laboratory comparison?
Yes
Please provide details about the scheme
1. ILC 131 Pilot lab was National Laboratory Association of South Africa – Dimensional field.
2. KEBS.EM.001-KENAS ILC – Pilot lab was Kenya Bureau of Standards – ACDC field.
3. KEBS.TORQUE.ILC.001.a&b – Pilot lab was Kenya Bureau of Standards – Torque field.
4. KEBS.001/2017 – Pilot lab was Kenya Bureau of Standards – Pressure field.
2. KEBS.EM.001-KENAS ILC – Pilot lab was Kenya Bureau of Standards – ACDC field.
3. KEBS.TORQUE.ILC.001.a&b – Pilot lab was Kenya Bureau of Standards – Torque field.
4. KEBS.001/2017 – Pilot lab was Kenya Bureau of Standards – Pressure field.
Does the laboratory sub-contract calibration work to other laboratories?
No
Quality Control / Quality Management
Does the lab operate an internal quality control (QC) system to ensure quality of measurement?
Yes
Does the lab operate a management system (or Quality Management System) for assuring the quality of calibrations?
Yes
Is the system documented in a Quality Manual?
Yes